Vehicles
Sections
199 not categorized PORSCHE CAYMAN S TEMPERATURECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2009-12 (includes uncategorized and accessory items) 240996351GV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $340.26
Make a selection 240996351OV Pagid orange rs44 are from the rs line of all-around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and excellent modulation. Rs44 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer smooth progression of friction from cold to hot. Rs44 pads offer lower disc wear rates and are fade resistant up to a temperature of 700*c (1,292*f). Applications include: club racing and rs44 are an excellent rear axle pad for front engine race cars. Features at a glance: medium friction coefficient medium initial bite excellent modulation pagid is one of the leading manufa...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $277.20
Make a selection FVD3522P18056A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection GR2012 Lubro moly lm 508 prevents seizing, galling and corrosion of threaded components and parts that are exposed to extreme temperatures. Insures accurate torquing during screw down. Permits destruction free disassembly later on! Lm 508 is an absolute must for exhaust parts, brake pad pins, and hardware. General FitmentACCESSORY
$6.85
Make a selection GR1006 Wurth rubber care is a versatile, all-in one spray for all your rubber needs. Silicone-free and paint-friendly, rubber care can be wiped off your paint if over spray occurs. Guards rubber against the damaging effects of heat and aging. Rubber care lifts wax and other substances safely from your rubber. It also protects and penetrates for longevity. Keeps rubber from fading, drying, dulling, cracking, and brittleness. Rubber remains supple and stick-free, the way it’s meant to be. Will not freeze in harsh winter temperatures. Nourishes, restores fragile, weak rubber. 300 ml aerosol can. General FitmentACCESSORY
$19.95
Make a selection FVD3522P18027A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection VHTSP109 Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. General FitmentACCESSORY
$16.44
Make a selection PAG8074RS29 Pagid rs29 is a recent development from the bases of rs19, with a very similar friction coefficient to rs19 with improvements in initial bite offering quicker response and slightly more temperature stable at the upper levels of the temperature range. Developments in raw material selection and compounding have resulted in improvements also in pedal feel and feedback, helping with modulation particularly on lighter applications. General Fitment911 2009-12
$562.40
Make a selection FVD721KVB05 Bleed your cooling system the same way your Porsche dealer does! The simplest way to completely refill the cooling system in only one operation. No air-bubbles, no problems, quick and reliable. The compact compressed air-driven appliance generates a vacuum in the entire cooling-system.this also allows the system to be tested with the built-in pressure gauge for leakage. Coolant then can be introduced into the system via the quick disconnect hose and filled using the vaccum allready in the system, pulling the coolant in from the remote canister. This ensures the cooling-system immediately works reliably with no additional work bleeding required. It practically bleeds itself. The problem solver for all water cool...(choose a part on the right to read more)
$596.20
Make a selection VHTSP117 Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. General FitmentACCESSORY
$16.45
Make a selection FVD10699701 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$548.90
Make a selection 9A112601105 A failing a/c compressor elevates cabin temperatures, emits loud sounds as the bearing fails and the internal clutch can even seize. If you experience any of these signs, replace your a/c compressor with this quality denso OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: this is meant for r134a refrigerant. Please check the model fitment tab to ensure accurate fitment.
From $1,042.80
Make a selection 24135196401BS Highlights: superb daily driver, OEM replacement, r90 type approved pad. Features red "brake in" surface coating for instant safe braking after install. New 100 % eco friendly material with zero sulphides. No shims for noise reduction needed. More bite from cold. Works in hot and dry climates as well as in cold. Fully r 90 approved. If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, maki...(choose a part on the right to read more)
$103.40
Make a selection FVD12399600R Silicone boost hose kit FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's. Facts: tested to withstand over 75 psi (5 bar) boost pressure.fuel and oil resistanttemperature range between - 50 to + 180 degreesbolt on kit over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts. Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.
$590.70
Make a selection 915300911550 If you are looking for a transmission oil cooler system that is simple to install, provides lasting results and is perfect for a driver, the weekender, or for track use look no further. This kit includes a sleek high-performance oil cooler that mounts simply to the transmission cover with the included bracket and hardware. The stainless braided lines seamlessly screw into the transmission housing drain / fill plug location, no modification required. The electric, self-priming, 12 v oil pump is made with helical bronze gears, a stainless-steel shaft and a nickel plated brass body for the reliability that you expect from your Porsche. The pump includes a bracket that allows for simple installation. Simply connect...(choose a part on the right to read more)
$1,529.00
Make a selection 98704400006 Protects against sunlight and provides additional privacy. This easy-to-fit woven screen is attached to the rear hatch using a simple clip-on system. As well as protecting against direct sunlight, it helps to reduce temperatures in the passenger compartment and provides additional privacy for the rear luggage area. General FitmentACCESSORY
$204.23
Make a selection 99310541906EQ Exhaust valve for 993 models from 1996-98 with m64.21/22/23/24 motors. 8 mm stem, 43.5 mm, weighs .22 lbs. (.1 kg). Sold individually. 6 necessary per car. When working on your cylinder head, we recommend replacing the valves, valve seat rings, guides, springs, retainers and temperature sensor at the same time to reduce future labor costs.
$73.70
Make a selection 91455903710PKG At last a factory look center console package with gauges and sending unit and harness almost identical to the factory original nla part. package consists of the factory duplicate reproduction center console, the special heater lever, the reproduction console wiring harness, the plastic heater lever bezel, the factory reproduction clock, volt meter, and temperature gauge, the temperature gauge sending unit, the sending unit plate and the sending unit o ring. Everything you need to install this beautiful assembly into your car and update it to the appearance group package offered originally when the car was new. This item is made to order and will take 4-6 weeks.
$795.00
Make a selection FVD10603500 Protect your engine and lower the operating water temperature by up to 60* f. Our kit contains everything you need to install this kit on a 3.4l 996. Don't be fooled by cheaper kits that claim they are complete, if the radiator is not supported correctly, road and track vibrations can destroy your investment. This fits Carrera c2 and c4 with manual transmission only ! This will not fit cars equipped with a tiptronic transmission.
$1,109.80
Make a selection 240981351GV Pagid yellow rsl29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a g...(choose a part on the right to read more)
$632.50
Make a selection BES99305040S FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
$1,820.50
Make a selection 240996351BV Pagid blue rs42 are from the rs line of all-around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $250.16
Make a selection 240991352GS Pagid yellow rsl 29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl 29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a...(choose a part on the right to read more)
$654.50
Make a selection FVD10397599 Cp-carrillo's fastener assembly lube is molybdenum based lubrication grease with enhanced properties. This product offers an improved clamp load repeatability, greater resistance to high pressure and temperature (range -22f to 1200f), and no oil contamination. The coefficient of friction stays unchanged, even after several connecting rod bolt re-tightening and loosening processes. We highly recommend lubricating the connecting rod bolt head and thread with this lubricant. Be sure to add it to your order if you are replacing your rod bolts. Sold individually.
$16.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |